Preventive Maintenance: 4 Tips For Keeping Your Garage Doors In Good Condition

You rely on your garage door to work effectively; after all, it keeps your garage protected and provides easy access into the garage and sometimes your home itself. While no garage door will last forever, there are definitely ways to improve its longevity and reduce the overall repairs that are needed. Here are some tips for preventing major repair work on your garage door with simple maintenance tasks.

Give it a Visual Inspection

Start by simply inspecting your garage door on a regular basis. There is a lot you can find out just by looking at the door, springs, rollers, and other mechanisms regularly. Regular inspections will help you discern if a certain mechanism needs to be oiled, if there is debris to be cleaned, or if a major part might need to be replaced by a professional. When you are inspecting the door, use your garage door opener remote a few times to make sure the garage door is working properly, looking closely at the balance of the door and how it opens and closes. Also test out the opener inside the garage to look at it from the inside of the garage. As you do a visual inspection, clean out any debris or build-up you find.

Test All the Hardware

Once your initial visual inspection is done, start looking a little more closely at the hardware. Since your garage door is used so often throughout the year, the hardware is at risk of getting rusty or loosening over time. Touch the hardware and see if any of it is loose. If it does feel loose, grab one of your wrenches and tighten it the best you can. Hardware to check out includes bolts, screws, and roller brackets. If you notice any hardware that doesn't seem to be tightening properly or looks overly rusted, it might need to be replaced.

Check the Rollers

Take some time to inspect the rollers on the garage door. The rollers will most likely be made of steel for durability. Look for signs of damage or wear and tear, such as cracks, chips, or a simple worn-out look. Rollers, like garage door springs, are something you should not replace yourself. Many of them are attached to the cable system, which makes them dangerous to work on unless you are a professional garage door contractor.

Lubricate the Mechanisms

Finally, now that all the most important parts of the garage door have been thoroughly inspected and cleaned, you can lubricate them. Even if you don't see rusting or hear squeaks, this should be done regularly. It can help prevent a lot of more serious repairs. Get some silicone oil and lubricate parts like the springs, rollers, and hinges. The tracks can also be lubricated if needed. Contact a local garage door contractor,like Bicknell Garage Door, for more help.


Share